Reversing Alarms

Specification and Downloads

Operation:

Standard message:*

Dimensions

Voltage:

Other features:

Message sounds continuously when reverse gear is engaged.

If third wire is connected alarm will not sound when vehicle lights are on.

“Attention...this vehicle is reversing”

100 x 110 mm

12/24 volts.

“e” mark

Automatic night-silent when vehicle lights are on.

May be used with over-ride timer OR-100 or double-engage over-ride unit OR-200 to give day and night over-ride facility with vehicle lights either on or off.

** Available in English/Welsh at no extra cost.

  May be supplied with your own personalised message upon request.

Operation:

Standard message:*

Dimensions

Voltage:

Other features:

Message sounds continuously when reverse gear is engaged.

If third wire is connected alarm will not sound when vehicle lights are on.

“Attention...this vehicle is reversing”

115 x 120 mm

12/24 volts.

“e” mark

Automatic night-silent when vehicle lights are on.

May be used with over-ride timer OR-100 or double-engage over-ride unit OR-200 to give day and night over-ride facility with vehicle lights either on or off.

** Available in English/Welsh at no extra cost.

  May be supplied with your own personalised message upon request.

Operation:

Standard message:*

Dimensions

Voltage:

Other features:

Message sounds continuously when reverse gear is engaged.

Selectable day and night over-ride facility with push button.

“Attention...this vehicle is reversing”

115 x 120 mm

12/24 volts.

“e” mark

Automatic night-silent when vehicle lights are on.

If the vehicle lights are off, a single depression of the over-ride button will silence the alarm for a period of about 4 minutes. This allows reversing manoeuvres to be completed in noise-sensitive locations such as hospital grounds.

If the vehicle lights are on, a single depression of the over-ride button will allow the alarm to sound during the following 4 minutes. This enables safe reversing during adverse weather conditions and busy pedestrian areas during darkness.

** Available in English/Welsh at no extra cost.

  May be supplied with your own personalised message upon request.

Operation:

Standard message:*

Dimensions

Voltage:

Other features:

Message sounds continuously when reverse gear is engaged.

Selectable day and night over-ride facility with push button.

“Attention...this vehicle is reversing”

115 x 120 mm

12/24 volts.

“e” mark

Automatic night-silent when vehicle lights are on.

If the vehicle lights are off, a single depression of the over-ride button will silence the alarm for a period of about 4 minutes. This allows reversing manoeuvres to be completed in noise-sensitive locations such as hospital grounds.

If the vehicle lights are on, a single depression of the over-ride button will allow the alarm to sound during the following 4 minutes. This enables safe reversing during adverse weather conditions and busy pedestrian areas during darkness.

** Available in English/Welsh at no extra cost.

  May be supplied with your own personalised message upon request.

Operation:

Standard message:*

Dimensions

Voltage:

Other features:

Message sounds continuously when reverse gear is engaged.

Selectable over-ride facility.

“Attention...this vehicle is reversing”

115 x 120 mm

12/24 volts.

“e” mark

If reverse gear is engaged, disengaged and engaged again within a period of 3 seconds the reversing alarm is silenced. The alarm resets automatically when neutral is next selected. Particularly suitable for vehicles with automatic gears.

** Available in English/Welsh at no extra cost.

  May be supplied with your own personalised message upon request.

Application:

Operation:

Voltage:

Other features:

May be used with any standard Junior or Senior alarm.

If the vehicle lights are off, a single depression of the over-ride button will silence the alarm for a period of about 4 minutes. This allows reversing manoeuvres to be completed in noise-sensitive locations such as hospital grounds.

If the vehicle lights are on, a single depression of the over-ride button will allow the alarm to sound during the following 4 minutes. This enables safe reversing during adverse weather conditions and busy pedestrian areas during darkness.

12/24 volts.

“e” mark

May be retro-fitted to existing alarms.

Application:

Operation:

Voltage:

Other features:

May be used with any standard Junior or Senior alarm.

If reverse gear is engaged, disengaged and engaged again within a period of 3 seconds the reversing alarm is silenced. The alarm resets automatically when neutral is next selected. Particularly suitable for vehicles with automatic gears.

12/24 volts.

“e” mark

May be retro-fitted to existing alarms.